SISHUINIANHUA 8000W DC 12V/24V/48V Wind Turbines Generator Charge Controller Waterproof Battery Charge Controller Regulator,48v#adSISHUINIANHUA #ad - 1. 4. 2. Although the controller has taken protective measures against various possible accidents, it is strongly recommended that users strictly abide by the operating procedures to prevent damage to the battery and controller.
Please carefully connect the battery and the wind turbines to the controller according to the instructions. Wire in the following order, first connect the positive and negative terminals of the battery, and then connect the three-phase voltage output of the fan.
Wind Charge Controller,12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator#adYWBL-WH #ad - Protective function:wind generator controller can automatically identify the voltage 12V or 24V, overload, low-power consumption. With short circuit, over-discharge automatic shutdown, anti-reverse protection, full, recovery and other protection measures.
Package list:1 × Wind Turbine Controller. Widly application: wind charge controller is suitable for solar street lamp, small solar power station system, and killing lamp, courtyard lamp, and all kinds of wind power DC power supply system.
Marsrock 400Watt 500Watt 600Watt Wind Turbine Generator Controller IP67 Waterproof 12V/24V Automatic Controller AC to DC#adMarsrock #ad - 1. The protection grade reaches the IP67 above, then the controller is easy to be corroded and damaged. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. 3. Meanwhile, it provides the maximum protection to the wind turbine and battery.
2. Unique reverse connect protection circuit. Voltage and current limiting are be enabled during recharging to ensure the best charging effect. 4. With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard.
Rectification of this controller and braking circuit part, or reliability, no matter from heat, have adopted the company design integration module, further than the traditional design. This controller can control wind turbines to charge the battery automatically. When the battery is fully charged, brake can be controlled automatically by the interior circuit. The comprehensive waterproof protection.
|Manufacturer||Mars Rock Power #ad|
Pikasola Hybrid Wind Controller and Solar Controller for 12V/24V Battery Auto, 30A Hybrid Charge Controller for Off Grid Max 800W Wind Turbine Charge and 1000W Solar Panel with MCT Charging Function.#adPikasola #ad - Especially mct charging function tracks the maximum current of the solar panel in real time. Protection function-: over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.
Charge controller for wind and solar can work steadily even in very humid environment. Operational system-: the charge controller use pwm technology by MOS tube in series which make solar and wind charge more efficient.
Scope of use-: hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind&solar complementary system. Ip67 waterproof-: the fully waterproof protection which grade reach into IP67.
1000W Wind Solar Hybrid Charge Controller ，Off Grid MPPT Wind Turbine Solar Charge Controller Hybrid Controller 600W Wind and 400W Solar Panel 12V/24V Auto Distinguish#adanancooler #ad - Mini-size, be easy to install. Wind solar hybrid input or independent Input Solar or Wind ，The Wind used for AC Wind or DC Wind. Wind mppt charging way, make sure power max. Independent boost circuit: Solved the charging efficiency of the low-power vertical wind generator.
Suitable For Family Camping Street Lights Wind Turbine Generator Kit 1500W/24V /2.0M/S11.5M/S 55M/S, Wind Turbine Generator With 5 Fan Blade Options With Charge Controller#adscamper #ad - It is ideal for the leisure field and is known for battery charging for boats, as well as green, home, cabins or RVs, gazebos, business and industrial windmills. Glass fiber reinforced blades, through optimized structure and streamlined shape, improve the wind energy coefficient and power generation capacity.
There are warehouses in the united states to place an order and send it immediately, which can save you a lot of shipping time, allowing you to use your tools faster and making your time more precious.
PIKASOLA 1400W Off Grid with Unloader Hybrid Wind Solar Controller Auto 12/24V Battery MPPT Charge Boost Float of max 800w Wind Turbine Generator 600w Solar Panel Home Street Light Controller#adPIKASOLA #ad - Solar panel charging use PWM technology by MOS tube in series. 2. Operational system-: the wind turbine charging part adopts booster MPPT technology, which make it charge continuous and efficiently even in low wind speed. Stepless unloading function including an external dump-load resistance.
3. Intelligent&stable system-：the parameter will be set prefect auto after choose battery type. Two dc load output with 4 output modes and each one can be set different model.
5. Protection function-: reversed charging protection of solar, over charge voltage/under voltage & Over load voltage Protection, Lightning Protection, battery reverse connects and open circuit protection, etc. Suit max 800w wind generator and max 600w solar panels for wind solar complementary system for home, boat, street light. 4. Display&dc load mode-: bigger lcd screen which easy to browse and handle.
Marsrock 1400W 12V/24V Auto MPPT Wind Solar Hybrid Charge Controller Support Gel and Lead-Acid Battery for Home Wind Turbine Generator and Solar Panel System#adMarsrock #ad - 2. In the high wind speed or the wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the stepless unloading function, protection system of the equipment.
5. The controllers with perfect protection function, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, including: lightning counter-attack, etc.1
3. Discharge part working mode can be set, light control mode, time control function etc, The user can be set up according to the requirements on its own combination. Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used.
|Manufacturer||Marsrock Power #ad|
|Warranty||1 Years from the purchasing date|
9. Cutting Edge Power#ad
Made in USA, Cutting Edge Power Digital 12V Charge Controller W Rectifier Wind Turbine PMA#adCutting Edge Power #ad - Excess power can be diverted to a useful device such as a water heater, space heater, etc. Ul>protect your battery by using this to dump / divert your excess power. Ul>configurable for wind or solar power.
|Brand||Cutting Edge Power #ad|
|Manufacturer||CUTTING EDGE POWER #ad|
Pikasola Wind Turbine Charge Controller Mini Wind Turbine Generator Controller IP67 Waterproof 12V/24V Automatic Controller Suitable for 400Watt 500Watt 600Watt Wind Turbine System#adPikasola #ad - The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design. 4. Good heat dissipation-: wind generator charge controller use Aluminum alloy shell and Therming Dissipine Structure with good Heat Dissipation.
1. Wind turbine controller-: wind charge controller can be used for 0-600w wind turbine. Also including lightning protection, automatic over-voltage braking, battery reverse connection and open protection.
When the battery is fully charged, brake can be taken effect automatically by the interior circuit. Protection- the fully waterproof protection which grade reach into IP67 above. When the battery voltage drops to restore voltage level, wind turbine can recover to charge battery automatically. Charge controller can work steadily even in very humid environment. 5. So wind controller to protect the wind turbine and the battery.