SISHUINIANHUA 8000W DC 12V/24V/48V Wind Turbines Generator Charge Controller Waterproof Battery Charge Controller Regulator,48v#adSISHUINIANHUA #ad - Although the controller has taken protective measures against various possible accidents, it is strongly recommended that users strictly abide by the operating procedures to prevent damage to the battery and controller.
Verify that the wind turbines output voltage matches the rated voltage of the battery. 2. Please carefully connect the battery and the wind turbines to the controller according to the instructions.
Wind Charge Controller,12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator#adYWBL-WH #ad - Widly application: wind charge controller is suitable for solar street lamp, and killing lamp, courtyard lamp, small solar power station system, and all kinds of wind power DC power supply system.
Waterproof:wind turbine controller adapts comprehensive waterproof protection, not easy to be corrosive and get damaged in humid conditions, more reliable. Specification: model: sf-12-24-a rated battery voltage: 12v/24v rated wind turbine power: 300W/600W Working temperature range: -35~75℃ Protection type: IP67 Weight: Approx.
Marsrock 400Watt 500Watt 600Watt Wind Turbine Generator Controller IP67 Waterproof 12V/24V Automatic Controller AC to DC#adMarsrock #ad - 1. The comprehensive waterproof protection. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery. Rectification of this controller and braking circuit part, no matter from heat, further than the traditional design.
Our product adopts full seal completely waterproof design which adapt to the heavy humidity, even in water can steadily work normally for a long time. Voltage and current limiting are be enabled during recharging to ensure the best charging effect.
This controller can control wind turbines to charge the battery automatically. When the battery is fully charged, brake can be controlled automatically by the interior circuit. Meanwhile, it provides the maximum protection to the wind turbine and battery. The protection grade reaches the IP67 above, salinity, then the controller is easy to be corroded and damaged. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point.
|Manufacturer||Mars Rock Power #ad|
30A Hybrid Charge Controller for Off Grid Max 800W Wind Turbine Charge and 1000W Solar Panel with MCT Charging Function., Pikasola Hybrid Wind Controller and Solar Controller for 12V/24V Battery Auto#adPikasola #ad - Especially mct charging function tracks the maximum current of the solar panel in real time. Ip67 waterproof-: the fully waterproof protection which grade reach into IP67. Operational system-: the charge controller use pwm technology by MOS tube in series which make solar and wind charge more efficient.
So the controller keep in an optimal heat dissipation state for a long time.
Charge controller for wind and solar can work steadily even in very humid environment. Good heat dissipation-：wind controller use aluminum alloy shell with multi-edge bottom plate design, which increase the heat dissipation area.
1000W Wind Solar Hybrid Charge Controller ，Off Grid MPPT Wind Turbine Solar Charge Controller Hybrid Controller 600W Wind and 400W Solar Panel 12V/24V Auto Distinguish#adanancooler #ad - Independent boost circuit: Solved the charging efficiency of the low-power vertical wind generator. Wind mppt charging way, make sure power max. 12v/24v system automatic recognition function.
Suitable For Family Camping Street Lights Wind Turbine Generator Kit 1500W/24V /2.0M/S11.5M/S 55M/S, Wind Turbine Generator With 5 Fan Blade Options With Charge Controller#adscamper #ad - It is ideal for the leisure field and is known for battery charging for boats, gazebos, home, as well as green, cabins or RVs, business and industrial windmills. There are warehouses in the united states to place an order and send it immediately, which can save you a lot of shipping time, allowing you to use your tools faster and making your time more precious.
The blades of the wind wheel are made of nylon fiber, high wind power utilization factor, along with the optimization of the aerodynamic shape design and structural design, an increase in annual power generation.
PIKASOLA 1400W Off Grid with Unloader Hybrid Wind Solar Controller Auto 12/24V Battery MPPT Charge Boost Float of max 800w Wind Turbine Generator 600w Solar Panel Home Street Light Controller#adPIKASOLA #ad - Solar panel charging use PWM technology by MOS tube in series. Two dc load output with 4 output modes and each one can be set different model. 4. Display&dc load mode-: bigger lcd screen which easy to browse and handle. Stepless unloading function including an external dump-load resistance.
5. Protection function-: reversed charging protection of solar, battery reverse connects and open circuit protection, Lightning Protection, over charge voltage/under voltage & Over load voltage Protection, etc.1
This system has been updated into more intelligent to can control charge voltage stable absolutely. Suit max 800w wind generator and max 600w solar panels for wind solar complementary system for home, street light. 3. Intelligent&stable system-：the parameter will be set prefect auto after choose battery type.
Marsrock 1400W 12V/24V Auto MPPT Wind Solar Hybrid Charge Controller Support Gel and Lead-Acid Battery for Home Wind Turbine Generator and Solar Panel System#adMarsrock #ad - 1. 12/24v auto match for 0-800w wind, 0-600w solar system. 4. Manmachine interface of the controller uses a custom LCD screen and four key operation mode, the user to use simple and easy to use, popular and easy to understand, convenient and quick.
3. Discharge part working mode can be set, light control mode, time control function etc, The user can be set up according to the requirements on its own combination.2
5. The controllers with perfect protection function, solar charger, over-voltage automatic braking, including: lightning counter-attack, storage battery reverse connect and open protection, etc. Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used.
|Manufacturer||Marsrock Power #ad|
|Warranty||1 Years from the purchasing date|
9. Cutting Edge Power#ad
Made in USA, Cutting Edge Power Digital 12V Charge Controller W Rectifier Wind Turbine PMA#adCutting Edge Power #ad - Ul>configurable for wind or solar power. Li>. Excess power can be diverted to a useful device such as a water heater, space heater, etc. Ul>components are mounted on a 3/16" non-conductive plate and pre-wired.
|Brand||Cutting Edge Power #ad|
|Manufacturer||CUTTING EDGE POWER #ad|
Pikasola Wind Turbine Charge Controller Mini Wind Turbine Generator Controller IP67 Waterproof 12V/24V Automatic Controller Suitable for 400Watt 500Watt 600Watt Wind Turbine System#adPikasola #ad - When the battery is fully charged, brake can be taken effect automatically by the interior circuit. Protection- the fully waterproof protection which grade reach into IP67 above. 1. Wind turbine controller-: wind charge controller can be used for 0-600w wind turbine.
Meanwhile, it provides the maximum protection to the wind turbine and battery. 4. Good heat dissipation-: wind generator charge controller use Aluminum alloy shell and Therming Dissipine Structure with good Heat Dissipation.
For improper operation of positive and negative electrode, user don't need to replace the fuse, only to reset the positive and negative in correct point. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design. Also including lightning protection, automatic over-voltage braking, battery reverse connection and open protection. 3.