Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 5 Inch Vent Hose

#ad
#ad
Tinker3D #ad - Antminer fan duct Shroud to connect 5 inch vent hose. Please be aware of other sellers because we can not guarantee their build quality or material. Works with antminer s15, t15, e3, s9i, t9, v9, s9, l3+, d3 and a3, x3, dragonMint, and Whatsminer. Antminer is a registered trademark of Bitmain Technologies.

This 5 inch design will have more efficient and better airflow than the 4 inch design! These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. We are not affiliated with Bitmain Technologies. Does not include 5 in vent hose or clamp.

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 5 Inch Vent Hose #ad - Made in usa and 3D printed using ABS. Improved airflow compared to 4 inch design. This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. We have worked hard to develop a quality and durable product. Just replace the fan guard with our fan duct using your existing screws and see results immediately.

As miners, we know how important it is to cool mining equipment and keep temperatures low. These will fit most asIC miners, including DragonMint and Whatsminer M10 Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.

More information about Tinker3D #ad

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose

#ad
#ad
Tinker3D #ad - Antminer is a registered trademark of Bitmain Technologies. Perfect item to keep temperatures low and increase mining efficiency. The duct was designed to fit standard 4 in vent hose and to keep air moving. These shrouds are 3d printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment.

This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. As miners, we know how important it is to cool mining equipment and keep temperatures low. Made in usa and 3D printed using ABS. This product is custom designed and manufactured by MG3D Designs.

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose #ad - We are not affiliated with Bitmain Technologies. Antminer fan duct Shroud to connect 4 inch vent hose. Just replace the fan guard with our fan duct using your existing screws and see results immediately. Designed to fit standard 120mm fans using existing screws. Does not include 4 in vent hose or clamp. Please be aware of other sellers because we can not guarantee their build quality or material.

Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk. Depending on color availability, item may be black or blue.

More information about Tinker3D #ad


Similar products



Woodstock W1023 5-Inch Hose Clamp

#ad
#ad
WOODSTOCK W1023 #ad - 5-inch in diameter. Designed to fit standard 120mm fans using existing screws. Made in usa and 3D printed using ABS. Antminer fan duct Shroud to connect 4 inch vent hose. Perfect item to keep temperatures low and increase mining efficiency. Choose from two styles, steel band or wire from 2-Inch to 6-Inch in diameter.

Woodstock W1023 5-Inch Hose Clamp #ad - Works with antminer s9, e3, s9i, x3, V9, l3+, t9, D3 and A3. Steel Band. Hose clamps are used to connect flexible piping to dust hoods, blast gates and fittings.

More information about WOODSTOCK W1023 #ad


Similar products



Hon&Guan 5" Stainless Steel Hose Clips Duct Clamps Adjustable Worm Drive Hose Clamp for Inline Duct Fan Pack of 2 125mm

#ad
#ad
Hon&Guan Ducting-Components #ad - Hon&Guan 5" Stainless Steel Hose Clips Duct Clamps Adjustable Worm Drive Hose Clamp for Inline Duct Fan Pack of 2 125mm #ad - Perfect item to keep temperatures low and increase mining efficiency. Designed to fit standard 120mm fans using existing screws. Works with antminer s9, x3, s9i, l3+, V9, e3, t9, D3 and A3. Steel Band. 5-inch in diameter. Made in usa and 3D printed using ABS. Pack of 2. For automotive, industrial and agricultural applications providing a tight seal.

Material:stainless steel; rust resistant. 4 sizes available and easy to install. What's included2 x stainless steel clip Antminer fan duct Shroud to connect 4 inch vent hose.

More information about Hon&Guan Ducting-Components #ad


Similar products



Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 6 inch Vent Hose

#ad
#ad
Tinker3D #ad - 5-inch in diameter. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk. Made in usa and 3D printed using ABS. Improved airflow compared to 5 or 4 inch design. We are not affiliated with Bitmain Technologies. Just replace the fan guard with our fan duct using your existing screws and see results immediately.

We have worked hard to develop a quality and durable product. This product is custom designed and manufactured by MG3D Designs. Will not work with Antminer S7 single fan design. The duct was designed to fit standard 6 in vent hose and to keep air moving. Designed to fit standard 120mm fans using existing screws.

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 6 inch Vent Hose #ad - Antminer fan duct Shroud to connect 4 inch vent hose. Works with antminer s9, s9i, e3, t9, l3+, V9, X3, D3 and A3. Steel Band. This 6 inch design will have more efficient and better airflow than the 5 or 4 inch design! These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment.

Does not include 5 in vent hose or clamp. Depending on color availability, item may be black or blue. Please be aware of other sellers because we can not guarantee their build quality or material.

More information about Tinker3D #ad


Similar products



Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s

#ad
#ad
Bitmain Antminer S9 #ad - Power consumption: 1323W ±10% 3. Power consumption: 1323W ±10% Power supply not included. Power supply unit is not included. This does not mean there are loose parts and does not mean the item is defective. Dimensions: 350mml*135mmW*158mmH 6. Works with antminer s15, l3+, e3, s9i, x3, t9, t15 s9, v9, D3 A3 and DragonMint miners.

Bitcoin mining hash rate: 13. 5th/s ±5%. Power supply is not included* if you have 220v-264v power, then Bitmain recommends using the APW3++ power supply. Perfect item to keep temperatures low and increase mining efficiency. Antminer fan duct Shroud to connect 4 inch vent hose. If you have 110v-120v power standard power outlets in the us, then the following power supplies have been confirmed to work well: -Bitmain's APW5 -Two Bitmain APW3++ -EVGA's SuperNova 1600 G2 Specifications: 1.

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s #ad - Network: ethernet cable is not included Notes: 1. Bitmain recommends the APW3++ for those with 220v power. All ten 6-pin pci-e power connectors are required. 2. The restocking fees are typically waived in the event that there is a provable failure that prevents the AntMiner from being within 5% of advertised speeds within the first 30 days.

Power Efficiency: 0

More information about Bitmain Antminer S9 #ad


Similar products



A058/5 Semi-Rigid Flexible Aluminum Duct 5" X 8'

#ad
#ad
Deflect-o A058/5 #ad - Works with antminer s9, s9i, v9, e3, X3, l3+, t9, D3 and A3. Steel Band. Made in usa and 3D printed using ABS. Works with antminer s15, l3+, x3, e3, t15 s9, s9i, v9, t9, D3 A3 and DragonMint miners. Bitcoin mining hash rate: 13. 5th/s ±5%. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+.

Semi-rigid but flexible for easy installation. 5 dia x 8-ft length Antminer fan duct Shroud to connect 4 inch vent hose. 5-inches by 8-feet. Designed to fit standard 120mm fans using existing screws. Improved airflow compared to 5 or 4 inch design. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Semi-rigid Aluminum Duct Non-Crimped.

A058/5 Semi-Rigid Flexible Aluminum Duct 5" X 8' #ad - Designed to fit standard 120mm fans using existing screws. Pack of 2. For automotive, industrial and agricultural applications providing a tight seal. Material:stainless steel; rust resistant. 4 sizes available and easy to install.

More information about Deflect-o A058/5 #ad


Similar products



Leviton 2620 30 Amp, 250 Volt, Flush Mounting Locking Receptacle, Industrial Grade, Grounding, V-0-MAX, Black

#ad
#ad
Leviton 2620 #ad - Made in usa and 3D printed using ABS. Semi-rigid Aluminum Duct Non-Crimped. Extra-thick 050 inch nickel-plated brass mounting strap for high-abuse applications. Evga supernova 1600 g2 recommended if you only have 110-120v power. For multiple uses - dryer, bathroom or kitchen venting. Single flush locking receptacle.

Pack of 2. For automotive, industrial and agricultural applications providing a tight seal. Material:stainless steel; rust resistant. 4 sizes available and easy to install. Fan duct shroud to connect 6 inch vent hose. 5-inch in diameter. Power consumption: 1323W ±10% Power supply not included. Color-coding Indicates Voltage Ratings.

Leviton 2620 30 Amp, 250 Volt, Flush Mounting Locking Receptacle, Industrial Grade, Grounding, V-0-MAX, Black #ad - Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Semi-rigid but flexible for easy installation. Antminer fan duct Shroud to connect 4 inch vent hose. Designed to fit standard 120mm fans using existing screws.

More information about Leviton 2620 #ad


Similar products



Speedi-Products EX-AFD 525 5-Inch Diameter by 25-Feet Length UL 181 Aluminum Foil Duct

#ad
#ad
Applied Applications International EX-AFD 525 #ad - Speedi-exhaust Products are made in the USA. Power consumption: 1323W ±10% Power supply not included. Ul v-0 flammability Rating;Total_power outlets:1. 5-inch in diameter. Nema and non-nEMA Configurations. 5-inches by 8-feet. Perfect item to keep temperatures low and increase mining efficiency. Most power efficient bitcoin Miner: 0

Speedi-Products EX-AFD 525 5-Inch Diameter by 25-Feet Length UL 181 Aluminum Foil Duct #ad - 098 j/gh ±7%. Made in usa and 3D printed using ABS. Fire resistant. Semi-rigid but flexible for easy installation. Evga supernova 1600 g2 recommended if you only have 110-120v power. For multiple uses - dryer, bathroom or kitchen venting. Made in usa and 3D printed using ABS. Works with antminer s9, s9i, t9, e3, X3, l3+, V9, D3 and A3.

Steel Band. Used in non insulated general purpose venting systems. Seal joints with approved duct mastic sealants and tapes. Designed to fit standard 120mm fans using existing screws. Ideal for non insulated general purpose venting systems.

More information about Applied Applications International EX-AFD 525 #ad


Similar products



iPower 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, 2 Pack, 4 Clamps included

#ad
#ad
iPower GLDUCT4X8CX2 #ad - This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc. Built-in web management portal - No separate host computer or software required. Benefits of ipower ducting: This 4-inch ducting fits any standard 4-inch inline fan. 5-inches by 8-feet. Made in usa and 3D printed using ABS.

iPower 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, 2 Pack, 4 Clamps included #ad - Seal joints with approved duct mastic sealants and tapes. Pack of 2. For automotive, industrial and agricultural applications providing a tight seal. Material:stainless steel; rust resistant. 4 sizes available and easy to install. Fan duct shroud to connect 6 inch vent hose. Each ducting unit includes a pair of metal clamps made from stainless steel.

12-month manufacturer warranty. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Evga supernova 1600 g2 recommended if you only have 110-120v power. For multiple uses - dryer, bathroom or kitchen venting. Designed to fit standard 120mm fans using existing screws.

More information about iPower GLDUCT4X8CX2 #ad


Similar products



Speedi-Products FD-25R4 05 5-Inch Diameter by 25-Feet Length R4.2 Insulated Flexible Duct with Metalized Jacket

#ad
#ad
Applied Applications International FD-25R4 05 #ad - Multi-ply metalized polyester and aluminum polyester laminate with steel wire support. Power consumption: 1323W ±10% Power supply not included. Semi-rigid Aluminum Duct Non-Crimped. Works with antminer s9, t9, e3, v9, s9i, X3, l3+, D3 and A3. Steel Band. Designed to fit standard 120mm fans using existing screws.

Evga supernova 1600 g2 recommended if you only have 110-120v power. For multiple uses - dryer, bathroom or kitchen venting. Color-coding Indicates Voltage Ratings. Wide applications: kitchens, Grow Tents, Grow Rooms, Greenhouses, Bathrooms, etc. Easy installation: 2 pairs of 4 inch metal clamps made from stainless steel.

Speedi-Products FD-25R4 05 5-Inch Diameter by 25-Feet Length R4.2 Insulated Flexible Duct with Metalized Jacket #ad - Ul v-0 flammability rating. Cut to length for each specific application. Designed to fit standard 120mm fans using existing screws. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Works with antminer s15, e3, s9i, v9, t15 s9, x3, t9, l3+, D3 A3 and DragonMint miners.

Bitcoin mining hash rate: 13. 5th/s ±5%.

More information about Applied Applications International FD-25R4 05 #ad


Similar products