AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-in WiFi Router AntRouter R1-LTC @ 1.29MH/s


Bitmain AntRouter R1-LTC - Can be used to mine any Scrypt-based coin on any pool. Litecoin mining Hashrate Scrypt: 1. 29mh/s ±10% asic chip type: bm1485 mining mode: Mines on any pool Power consumption: 3. 78w ±2. 9% at the wall Mining power efficiency: 2. 93 j/mh ±2. 9% wifi standard: 802. 11g/n, 2. 4ghz input current: 02a usb charging port voltage: 5v operating temperature: 0 - 40°C Operating humidity: 5%RH-95%RH, Must prevent condensation Product dimensions: 84.

5mml x 56. 6mmw x 29mmh weight: 148 grams q: can the antrouter be configured as a wifi client so that I don't have to connect an Ethernet cable to it? A: Yes! check out this guide: https://youtu. Be/3acr2a3dppq compatible coins:abyadcnancariaurbelablazrblcnblzbtacnccscdgbdotemc2emdfrngamegldkiclinxltbltclunamecmoonnlgnotenvcnyanpakqtlscoresfcsongsxctipstrollttcWBBWDCXVG Litecoin mining hashrate: 1.

AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-in WiFi Router AntRouter R1-LTC @ 1.29MH/s - 29mh/s ±10% faster than $900 AMD 7990 GPU. Can be configured as a WiFi client on your existing network without Ethernet. Built-in power supply Plugs directly into a power outlet. Built-in web management - Separate host computer NOT required for mining.

More information about Bitmain AntRouter R1-LTC

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner


Bitmain L3+ - Fastest litecoin or other Scrypt-based coin ASIC miner commercially available! Sounds like a vacuum. Chip quantity per unit: 288 x BM1485. Rated voltage: 11. 60 ~13. 00v. Operating temperature: 0C to 40C. Network connection: Ethernet cable not included. Notes:1. Each antminer l3+ requires nine 6-pin pci-e connectors for 12v dc input must be very stable power supply There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller.

Due to the nature of these products, there are higher than normal restocking fees typically 40%. There are many dozen coins, but the most well known is Litecoin. Scrypt mining hash rate: 504MH/s ±7% is expected. Compatible coins: Litecoin and any other Scrypt-based coins. Power consumption: 800W ±10% at the wall.

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner - Noise level: Loud. Antminer aPW3++ recommended. Not for desk-top use. Power consumption: 800W ±10% Power supply sold separately. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.

More information about Bitmain L3+


Similar products



AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9


Bitmain V9 - 3. Power supply is not included* bitmain recommends using the APW3++ or APW7 power supply. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included.

The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. Asic chip: bm15806. Bitmain recommends the apw3++ or APW7 power supply for the AntMiner V9. Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4.

AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9 - 0th/s ±5%. Power supply unit is not included. Power consumption: 800W ±10% Power supply sold separately. 4. Rated voltage: 11. 60 ~13. 00v5. Network connection: Ethernet network cable not includedPlease note the following: 1.

More information about Bitmain V9


Similar products



FutureBit Moonlander 2 USB Stick ASIC Miner for Scrypt Algorithm Cryptocurrencies - Litecoin


FutureBit FBM20011 - Built-in controller - No separate host computer required for operation. Power supply sold separately. The moonlander 2 is built with the latest generation 28nm scrypt ASIC at its core, and uses the highest quality voltage controllers and components to ensure stable efficient 24/7 operation needed for cryptocurrency mining.

Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4. 0th/s ±5%. Easy to use, and user adjustable clocks and voltages for the tinkerer. All you need a compatible windows/mac/linux computer with a high powered usb port to get started! Simply download the USB drivers, plug in the Moonlander and you are ready to go! The Moonlander 2 works with most Windows 7/8/10 based systems, our mining software, Mac OS 10.

12 or greater, and most linux based systems including Raspberry Pies! Check out our Getting Started page to get up and running quickly at www. Futurebit. Io! you can also find more info and community feedback at our forum support thread. The miner is designed to run out of the box with no adjustments, but offers full clock and voltage control for people that love to tinker! The miner is very easy to use and setup, and you can get started with no previous mining experience needed.

FutureBit Moonlander 2 USB Stick ASIC Miner for Scrypt Algorithm Cryptocurrencies - Litecoin - Hashes between 3mh/s to 5MH/s with under 10 watts of power needed. It also features a fully custom designed pin heatsink and fan forced induction cooling solution, which is an industry first for a USB miner, and allows quiet cool operation at maximum frequencies with no external cooling solutions needed.

The futurebit moonlander 2 is an easy to use, low cost USB miner designed to introduce new users to the world of cryptocurrencies and mining.

More information about FutureBit FBM20011


Similar products



Intel BX80677G3930 7th Gen Celeron Desktop Processors


Intel BX80677G3930 - Can be run on windows, Mac, and Linux including Raspberry Pi! Hash rate: 504mh/s ±7%. Intel 200/1001 series chipset compatibility 1. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended. Excludes Intel octane technology support. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included.

Hashes between 3mh/s to 5MH/s with under 10 watts of power needed. Power consumption: 800W ±10% Power supply sold separately. Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4. 0th/s ±5%. Currently the most efficient and powerful USB miner available. Built-in web management Portal - No separate Host Computer or Software Required.

Intel BX80677G3930 7th Gen Celeron Desktop Processors - . Easy to use and low cost USB based cryptocurrency miner for Litecoin, Digibyte, etc. Built-in controller - No separate host computer required for operation. Power supply sold separately. Socket lga 1151. Easy to use, and user adjustable clocks and voltages for the tinkerer.

More information about Intel BX80677G3930


Similar products



Electop 2 Pack 2 Pin SW PC Power Cable on/Off Push Button ATX Computer Switch Wire 45cm


Electop 2 Pin SW PC Power Cable - Socket lga 1151. Hash rate: 504mh/s ±7%. Easy to use, and user adjustable clocks and voltages for the tinkerer. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended. Intel 200/1001 series chipset compatibility 1. Intel hd graphics 610 Power consumption: 800W ±10% Power supply sold separately.

The product works well for mining rig. Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4. 0th/s ±5%. Easy to install without any driver, plug and use. Length: 45cm. Replacement for a broken or damaged power button switch/cable on a desktop computer Fastest litecoin or other Scrypt-based coin ASIC miner commercially available!

Electop 2 Pack 2 Pin SW PC Power Cable on/Off Push Button ATX Computer Switch Wire 45cm - Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. Hashes between 3mh/s to 5MH/s with under 10 watts of power needed. Can be run on windows, Mac, and Linux including Raspberry Pi! Built-in controller - No separate host computer required for operation.

Power supply sold separately.

More information about Electop 2 Pin SW PC Power Cable


Similar products



Discontinued GekkoScience 2PAC Dual BM1384 USB Stickminer


GekkoScience 2-PAC - Perfect fit for a motherboard's 2-pin power switch Power SW header. Efficiency is. 31-. 35 watts per gh. Discontinued by the manufacturer replaced by gekkoscience newpac dual bm1387 usb stickminer the most efficient USB miner ever manufactured is available in limited quantities! The 2-PAC Compac features 2 Bitmain BM1384 chips same chip in S5 and a fully adjustable regulator design that gives you a core voltage range of 550mV to 800mV.

Hash rate: 504mh/s ±7%. Hashes between 3mh/s to 5MH/s with under 10 watts of power needed. Currently the most efficient and powerful USB miner available. Easy to install without any driver, plug and use. Length: 45cm. Intel 200/1001 series chipset compatibility 1. Built-in web management Portal - No separate Host Computer or Software Required.

Discontinued GekkoScience 2PAC Dual BM1384 USB Stickminer - Typical hashrate is 15+gh/s depending on clock rate. Power consumption: 800W ±10% Power supply sold separately. Completely silent operation Bitmain BM1384 chips. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included.

More information about GekkoScience 2-PAC


Similar products



Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose


Tinker3D - This product is custom designed and manufactured by MG3D Designs. Intel hd graphics 610 Perfect fit for a motherboard's 2-pin power switch Power SW header. Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4. 0th/s ±5%. Designed to fit standard 120mm fans using existing screws. Antminer fan duct Shroud to connect 4 inch vent hose.

Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended. Excellent build quality, great for replacing the power switch cable as a Momentary reset switch cable and restart switch cable. We have worked hard to develop a quality and durable product. These shrouds are 3d printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment.

Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose - Power consumption: 800W ±10% Power supply sold separately. Perfect item to keep temperatures low and increase mining efficiency. Socket lga 1151. Does not include 4 in vent hose or clamp. As miners, we know how important it is to cool mining equipment and keep temperatures low. Currently the most efficient and powerful USB miner available.

More information about Tinker3D


Similar products



Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s


Bitmain Antminer S9 - Do not connect more than one PSU to the same hashing board! 3. 2. Evga supernova 1600 g2 recommended if you only have 110-120v power. Built-in controller - No separate host computer required for operation. Power supply sold separately. Excellent build quality, great for replacing the power switch cable as a Momentary reset switch cable and restart switch cable.

Bitmain recommends the APW3++ for those with 220v power. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. All ten 6-pin pci-e power connectors are required. Easy to install without any driver, plug and use. Length: 45cm. Intel hd graphics 610

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s - The antminer s9 requires TEN 6-pin PCI-e connectors. If you have 110v-120v power standard power outlets in the us, then the following power supplies have been confirmed to work well: -Bitmain's APW5 -Two Bitmain APW3++ -EVGA's SuperNova 1600 G2 Specifications: 1. Easy to use, and user adjustable clocks and voltages for the tinkerer.

4. Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4.

More information about Bitmain Antminer S9


Similar products



FutureBit Moonlander 2 Litcoin USB Miner


FutureBit - Designed to fit standard 120mm fans using existing screws. Antminer aPW3++ recommended. Bitcoin mining hash Rate: 4. 0th/s ±5%. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Made in usa and 3D printed using ABS. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Can be run on windows, Mac, and Linux including Raspberry Pi!

3mh to 5mh scrypt performance per miner - Uses about 1. 5w/mh for most of that range - core clock from 500mhz to nearly 1GHz! - Fully customizable core voltage range from. 6 - 1v - fully redesigned 5v->core voltage stage with about 95% efficiency - heavy duty/over speced parts were used to ensure wide range of operation stick can be pushed to nearly 6mh if you can cool it - Dtatus LEDs for power, TX and RX transmission - Uses latest bfgminer 5.

FutureBit Moonlander 2 Litcoin USB Miner - 4 for control - will work with all mac os, and windows based pcs, Linux, as well as RPi's etc and I will be offering easy to use pre-compiled binaries Fastest litecoin or other Scrypt-based coin ASIC miner commercially available!. Intel hd graphics 610 Socket lga 1151. Excellent build quality, great for replacing the power switch cable as a Momentary reset switch cable and restart switch cable.

Built-in web management portal - No separate host computer or software required. Perfect item to keep temperatures low and increase mining efficiency.

More information about FutureBit


Similar products



ARCTIC Breeze Mobile, USB-Powered 92mm Portable Fan, Portable Cooling Solution, Quiet Fan, Mini USB Fan, Mini Gooseneck Fan for Laptop and PC - White


ARCTIC ABACO-BZG00-010000 - The company, has locations in germany, hong kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, run by founder Magnus Huber, high quality and fair prices. Socket lga 1151. Compatibility - laptops and Desktop PCs, product is 8. 6 centimiters long with a neck of 8 centimiters ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems.

15gh/s mining speedhigher speed requires usb port above spec 32-. 35 watts per gh. Excludes Intel octane technology support. Perfect fit for a motherboard's 2-pin power switch Power SW header. Besides a wide range of cpu and gpu coolers, ARCTIC offers high quality monitor mounts as well as an audio product line.

ARCTIC Breeze Mobile, USB-Powered 92mm Portable Fan, Portable Cooling Solution, Quiet Fan, Mini USB Fan, Mini Gooseneck Fan for Laptop and PC - White - Built-in web management portal - No separate host computer or software required. Built-in controller - No separate host computer required for operation. Power supply sold separately. Designed to fit standard 120mm fans using existing screws. Intel hd graphics 610 Easy to use, and user adjustable clocks and voltages for the tinkerer.

More information about ARCTIC ABACO-BZG00-010000


Similar products